top of page
Strymon Iridium | Amp&Cab Modeler

Strymon Iridium | Amp&Cab Modeler

***Used Strymon Iridium, comes along with original box, powersupply and usb cable. Great Condition. Here below is what Strymon have to say about it*** 

 

 

Leave Your Amp At Home.

Nothing reveals the true nature of your guitar and your playing like a world-class tube amp driving a perfectly matched speaker cabinet in a great sounding room. Now there is a pedal that truly delivers that sound and feel, with simple controls for effortlessly dialing in the perfect amp tone when going direct. Discover inspiring tube amp responsiveness, unprecedented impulse response speaker cabinet realism, and controllable natural sounding room ambience.

 

Go Direct With Gorgeous Tone.

Iridium gives you three iconic amplifiers, with a total of nine impulse response speaker cabinets that complement the tonality of the amp. Skip the hassle of lugging around or miking amps. Place Iridium on your pedalboard and send gorgeous stereo amplifier tones, stunningly realistic cabs, and lush room ambience direct to a recording interface or PA system. With Iridium, it’s a snap to dial in a direct tone that will truly inspire and sound great whether you are monitoring through in-ears, floor wedges, reference monitors, or studio headphones.

 

From the unique composition of each tone stack, to component values, bias levels, corner frequencies, and tube stage gain; all of these factors affect the way a note or chord reacts and evolves over time, and all have been mathematically modeled with the highest fidelity.

 

Use it at home: 

You can’t always crank up an amplifier when you want to play in your living room or rehearse at home.

Plug your favorite set of headphones into Iridium’s headphone jack and get immersed in the sounds of iconic amps and cabs in a natural sounding room.

Integrate Iridium into your pedalboard by placing at the end of your chain and experience your entire pedalboard tones directly in your headphones.

 

In the studio:

Iridium provides gorgeous, iconic amp tones, stunningly realistic stereo cabinet impulse responses, and natural room ambience—essential elements for recording guitar in the studio.

Place Iridium at the end of your effects chain and capture stereo amp and cab tones direct into your recording interface.

Or, place Iridium before your delays and reverbs to allow those time-based effects to occur post amp and cab.

Skip the hassle of miking up your amps or having to crank them up to get the tone you desire. Instantly audition amps and cabs with the flick of a switch.

 

On Stage: 

Want to play live with the exact same tones that you use at home or in the studio?

Or have access to multiple amp and cab setups without having to lug them on stage?

Leave your amps at home, and connect Iridium directly to the house PA system.

Going direct eliminates the need to mic an amp, giving sound engineers the option to send your amp and cab tone directly to a wedge or in-ear monitors.

Instant adjustments to your tone are right there on your pedalboard, only a footswitch away. With Iridium, there are no menus to wade through—just familiar, responsive amp-style controls for instant, easy adjustment.

 

 

 

Included Nine Stunningly Realistic Cabs:

Iridium comes pre-loaded with a carefully curated collection of premium cabinet IRs from OwnHammer, Celestion, cabIR and Valhallir.

 

You can also load your own IRs using Strymon Impulse Manager software.

Deluxe Reverb® 1×12″ by OwnHammer
Impulse of a vintage Fender® Deluxe Reverb 1×12″ open back combo with a 1978 Fender CTS ceramic 12″ speaker.

Blues Junior® 1×12″ by cabIR
Impulse of a 1×12″ Blues Junior cabinet with a Jensen® C12N speaker.

Vibrolux® 2×10″ by cabIR
Impulse of a 1965 Fender Vibrolux 2×10″ with Jensen C10NS speakers.

AC30 2×12″ AlNiCo by OwnHammer
Impulse of a Vox® AC30/6 open back 2×12″ combo with 2001 Celestion® T0530 Blue AlNiCo speakers.

1×12″ AlNiCo by Celestion
Impulse of a Celestion Blue AlNiCo speaker in a closed back 1×12″ cab.

Mesa® 4×12″ by Valhallir
Impulse of a 4×12″ Mesa Boogie halfback with two Celestion Black Shadow® MC-90 and two ElectroVoice® Black Shadow EVM12-L speakers.

GNR 4×12″ by OwnHammer
Impulse of a 1971 Marshall® 1960B “basketweave” 4×12″ cabinet with 1971 Celestion T1221 G12M-25 speakers.

2×12″ Vintage 30 by Celestion
Impulse of a Celestion Vintage 30 in an open back 2×12″ cab.

Marshall 8×12″ AlNiCo by cabIR
Impulse of a 1965 Marshall 8×12″ re-issue full stack cabinet, with Celestion T652 AlNiCo speakers.

  • SPECS

    • Three amplifier models crafted using Matrix Modeling™, capturing the subtleties and unique tonal qualities of each amp
    • Round Amp – based on* a Fender® Deluxe Reverb®
      • Chime Amp – based on* the Brilliant channel of a Vox® AC30
      • Punch Amp – based on* a Marshall® Plexi (Super Lead model number 1959)
    • Nine Impulse Response speaker cabinets, 24bit / 96kHz 500ms
      Stereo (three per amp type), pre-loaded with a curated set of IRs:
      • Deluxe Reverb 1×12″ by OwnHammer
      • Blues Junior® 1×12″ by CabIR
      • Vibrolux® 2×10″ by CabIR
      • AC30 2×12″AlNiCo by OwnHammer
      • 1×12″ AlNiCo by Celestion®
      • Mesa® 4×12″ by Valhallir
      • GNR 4×12″ by OwnHammer
      • 2×12″ Vintage 30 by Celestion
      • Marshall® 8×12″AlNiCo by CabIR
    • Load your own impulse responses using Strymon Impulse Manager software
    • Hybrid IR/algorithmic Room control with selectable small, medium, and
      large rooms
    • Simple, responsive amp-style controls for Drive, Level, Bass, Middle,
      and Treble
    • Premium stereo high impedance discrete JFET analog front end with
      up to 22dB of pure analog gain

     

    - Stereo Input (requires TRS adapter cable)

    - Stereo Output

    - Operates at instrument and Line Level input sources

    - Discrete transistor headphone amplifier

    - Expression pedal input provides seamless morphing between knob positions (Expression mode), or smooth pre/post volume control with logarithmic taper (Volume mode)

    - USB jack for connecting to Strymon Impulse Manager software
    to add and edit your own speaker cabinet IRs

    - Compatible with Strymon MultiSwitch Plus for remote selection of up to 4 presets

    - Full featured MIDI control accessible via EXP Jack for remote parameter control and access to 300 preset locations (requires Strymon MIDI EXP cable or MIDI to TRS interface)

    * Designed and built in the USA

€330.00Price
Out of Stock
bottom of page