top of page
used speaker for a pa system malta

EV SX300 12" Passive PA Loudspeaker


This slightly used EV SX300 is an outstanding lightweight, high-power passive speaker with 300 watts continuous, 1,200 watt peak power handling. Delivers over 125 dB continuous, 131 dB peaks (1 w / 1 m) at full power. 650 x 650 Constant-directivity horn allows use vertically or horizontally with identical coverage.


The EV SX300 delivers better pattern control and projection than typical 900 horns. Proven, reliable EV components including DL12BFH cast-frame 12-inch woofer and DH2010a pure titanium compression driver. The built-in stand mount and inserts in the EV SX300 allow it to be safely suspended and arrayed using a wide range of optional cost-effective hardware. Can also be used as a floor monitor. 


Features :

- Compact, portable sound reinforcement

- Designed for use alone or in arrays

- Cast-frame DL12BFH woofer

- 1.25-inch DH3/2010A titanium HF compression driver

- 65º x 65º Constant-directivity Varipath™ horn

- Ring-Mode Decoupling (RMD™) for increased intelligibility

- Power handling: 300 W continuous, 1200 W peak

- Dual Neutrik Speakon(R) high-current connectors

- Trapezoidal black or white polypropylene enclosure

- Rubber feet and mating sockets for stacking

- Integral handles, pole mount


    - Frequency Range (-10 dB): 50 - 20000kHz

    - Weight Net: 39.02lbs (17.7kg)

    - Depth: 12.28" (312mm)

    - Width: 16.89" (429mm)

    - Height: 23.07" (586mm)

    - Weatherized: No

    - Flying: Yes

    - Enclosure Material: Copolymer Composite

    - Minimum Impedance: 5Ω

    - Nominal Impedance (Passive): 8Ω

    - Crossover Frequency: 1500Hz

    - Speaker Type: Full-Range, Mid-High, Two-Way

    - Input Connections: 2 four-pin Speakon

    - Internal Crossover: Yes

    - Axial Sensitivity (SPL, 1 W @ 1 m): 99dB

    - Chassis Size: 304.8 mm


Out of Stock
bottom of page